Amplitec coax switch 1:8, manual & PC control, PL

The Amplitec coaxial switch SW-3000-8-DIG-MPC can be used in the entire frequency spectrum from 100 kHz to 30 MHz, as well as on 50 MHz and 70 MHz. Particularly practical: The selection of the desired output can be made not only on the remote control unit, which can be positioned at a suitable place optimally accessible, but also on the computer. For this purpose, the control unit is equipped with a USB port for establishing the connection. The software, which is available free of charge, is very clear and intuitive to use.

An easy-to-read 7-segment LED display on the control unit provides information about the currently switched output at any time.

The antenna cables and the coax cable to the station are brought together at the actual "switch". This separate box can be placed away from the working area, e.g. in the attic or in an adjoining room. This can significantly reduce cable clutter in the shack. Controller and switch are connected with a control cable of any length (not included). For this purpose, 9-pin Sub-D sockets are available on both housings, the plugs required for this are supplied. 

The power supply of 13.8 V DC is provided directly via the hollow pin socket on the control unit, a suitable power cable is also included in the scope of delivery.

Maximum power handling:

• 100 kHz - 30 MHz: 3000 watts
• 50 MHz: 2000 watts
• 70 MHz: 1000 watts

The suitable control cable for connecting the control unit and the switch can be found below.