Amplitec coax switch 4/6/8/12xPL, with control unit

The Amplitec coaxial switches of the SW-3000 series are available in versions with 4, 6, 8 or 12 manually switchable outputs and can be used in the entire frequency spectrum from 100 kHz to 30 MHz, as well as on 50 MHz and 70 MHz. Particularly practical: The selection of the desired output is conveniently made on a remote control unit, which can be positioned in a suitable place so as to be optimally accessible.

An easy-to-read 7-segment LED display provides information on the currently switched output at all times.

The antenna cables and the coaxial cable to the station are brought together at the actual "switch". This separate box can be placed away from the workplace, e.g. in the attic or in an adjoining room. This can significantly reduce cable clutter in the shack. Controller and switch are connected with a control cable of any length (not included). For this purpose, 9-pin Sub-D sockets are available on both housings, the plugs required for this are supplied. The "12:1" version, on the other hand, uses 15-pin connectors.

The 13.8 V DC power supply is provided directly via the barrel connector on the control unit, a suitable power cable is also included in the scope of delivery.

Maximum power handling:

• 100 kHz - 30 MHz: 3000 watts
• 50 MHz: 2000 Watt
• 70 MHz: 1000 Watt

The appropriate control cable for connecting the control unit and switch can be found below.