Smarteq Base 1123, round, without cable, FME

The mounting feet from Smarteq are suitable for body mounting on the roof. The connection to the antenna radiator is an M6 external thread. The feet are supplied in individual parts and are mounted from the inside through the hole, if mounted correctly the foot is watertight. A 14 to 19 mm Ø hole is required for mounting, see table. All Smarteq mounting feet are coloured black, weatherproof and UV-resistant.

The inclination of the Base 1123 mounting foot can be adjusted by up to 30° from the mounting direction by bending the upper part of the mounting foot. With the Base 128 mounting foot, the inclination of up to 90° is adjusted via a disc attached to the side and secured with a screw. The feet are supplied optionally with or without cable.

The Base 1123 model without cable uses FME, the Base 128 model without cable requires the special Smarteq plug '45866+' (WiMo no. 62106.02).

The combined GPS mounting foot is not manufactured by Smarteq, but can be fitted with the same antenna radiators with M6 thread. The M6 bolt in the foot can also be removed, the foot then has an M5 internal thread for other antenna radiators. The integrated GPS antenna has an amplifier and is supplied with voltage via the coaxial cable (3.3 to 5V).