EAntenna AVM monoband vertical antennas for shortwave
Please select a product
Top Features
- Robust
- Load capacity 5 kW
- Incl. mast mount and guy eyes
Supply Scope
- AVM Monoband Vertical Antenna
- mast mount
- Eyelets for bracing the segments
- Allen key
- Manual
Technical description
The AVM vertical antennas from EAntenna are designed for one band and do not use traps. This results in a simple setup, low wind resistance and an inconspicuous design.
The SWR is in most cases below 2.5:1, in some cases a tuner is necessary. A longer coaxial cable to the feed can help improve matching in extreme cases, where the outer shield acts as a counterweight. Additional radials or counterweights are necessary, here 4 wires of 5m each or 8 wires of 2m each are sufficient, but more are welcome. All antennas can be loaded with up to 5 kW. The indicated wind speed is valid with correct tensioning of all planes in three directions.
Application description
The EAntenna AVM monoband antennas are available for the bands 80, 40, 30 and 20m.
- 20AVM: The antenna consists of 4 segments and has one guy point.
- 30AVM: The radiator consists of 6 segments and has guy points on 2 levels
- 40AVM: The AVM40 also consists of 6 segments with guy points on 2 levels.
- 80AVM: Due to its impressive height of over 20 meters, this antenna consists of 13 segments. The guy points are on 4 levels.
| Product Name | EAntenna AVM monoband vertical antennas for shortwave |
|---|---|
| Design of antenna | Vertical Omni |
| Antenna Type | Omni-directional Antenna |
| Mono-/Multiband | Monoband |
| Polarisation | Vertical |
| Brand | EAntenna |
| Max. Power [W] | 5000 W |
| Max. Windspeed (km/h) | 160 |
| Impedance [Ohm] | 50 |
