Elad FDM-DUO Transceiver Standard/Red
As low as:
€1,199.00
incl. VAT, plus shipping
€1,007.56
Please select a product
Only %1 left
SKU
pm_elad_fdm_duo
Supply Scope
- Elad FDM-DUO/FDM-DUO-RED transceiver
- 3 × USB A / B cables
- 1 × USB adapter to USB Micro-B
- 2 × audio cables stereo 3.5 mm jack plug on both sides
- 1 × NF extension cable stereo 3.5 mm jack plug / socket
- 1 × DC plug power supply cable, other side open
- 1 × 9 pin D-Sub connector
- 1 × USB stick with FDM-SW2 software, manuals in EN and IT (PDF)
- 1 × hand microphone, electret type, RJ-45 connector, Icom compatible
- 1 × Quick Start Guide
Download
A SDR transceiver with 5 W output that can operate as a stand-alone without a PC!
The
small transceiver is equipped with the latest SDR technology: A fast
analog-digital-converter samples the received HF directly into digital
signals and a downstream DSP module provides for filtering and
processing. Another ARM processor handles the signals of the control
unit.
One highlight of the FDM-DUO is
the possibility to use it standalone without a computer also. Then, this
transceiver is a perfect companion for the QRP fan, so that you can
have a modern SDR with you even on holidays. The controls are very easy
to use for a portable QRP transceiver. In addition to a big VFO knob
there are two smaller knobs for volume and filter-center/width (amongst
others). Six buttons below the well readable LC-display access the most
important functions directly. Less frequently used settings are
available via menu system.
Connected to a
PC, FDM-DUO is a very modern SDR receiver and transmitter with
capabilities which are usually available in very large large radios
only.
The device receives from 10 kHz to
54 MHz. A 16-bit ADC with 122 MHz sampling rate is built-in. Receive
modes are: SSB, CW, AM (incl. Sync-AM), FM, WFM (incl. Stereo and RDS!),
RTTY and DRM. The transmitter has 5 W output power, alternatively a HF
output jack with 0 dBm output.
Together
with a computer the possibilities for the FDM-DUO are extended quite
considerably of course. Three(!) USB 2.0 interfaces offer a wide range
of possibilities. One interfaces works as a CAT controller, another one
provides digital I/Q data for the waterfall diagram, and the third USB
port serves as a external sound card for the PC! This way the FDM-DUO
can be used for digital modes such as RTTY, PSK31 etc. By distributing
these functions to three separate USB interfaces the handling for the
user is made much easier, in most cases no additional USB drivers are
required.
The FDM-DUO has two configurable antenna jacks: RX/TX on the same jack, or RX and TX on one jack each.
| Product Name | Elad FDM-DUO Transceiver Standard/Red |
|---|---|
| Brand | Elad |
| Weight | 1.25 kg |
