PNI-ML100 CB magnetic base antenna, 110 cm, 250W
In stock, shipped in 1 to 2 days
Top Features
- Continuous power handling up to 250 W
- Total height 110 cm
Supply Scope
- Magnetic base with 4 m RG-58 cable and PL plug
- Antenna rod
- Allen key
- Multilingual quick start guide
Download
Increase your range with the PNI ML100 magnetic base antenna!
The basis of this antenna is a magnetic base with a diameter of 125 mm. Thanks to the powerful magnet, the antenna can remain mounted even while driving. The stainless steel radiator has an elastic spring as well as a PL connection at the base. With the 4 m long cable, type RG-58, the antenna can be connected directly to the radio. A PL plug with kink protection is already mounted, no soldering is required.
The ML100 is suitable for permanent transmit power up to 250 W, maximum it can handle up to 500 W, of course only for very short periods.
The standing wave (SWR) should be calibrated with a suitable measuring device before commissioning. For this purpose, the stainless steel antenna rod is pushed in or pulled out and fixed with an Allen screw.
Only with an optimally tuned antenna can you achieve the full performance of the antenna and avoid possible damage to the radio.
For optimal radiation, we recommend mounting the antenna in the center of the vehicle roof.
Product Name | ML100 |
---|---|
Mono-/Multiband | Monoband |
Brand | PNI |
Height | 1.1 |
Weight | 970 g |
Max. Power [W] | 500 W |
Band | 11m |
Frequency Range | 26 - 28 MHz |
Antenna Type | Omni-directional Antenna |
Design of antenna | Magnet base antenna |
Connector | PL connector (male) |