qro.cz Easy Stack Match Controller 2:1/3:1

The Easy Stack Match Controllers are perfectly suited for controlling the 2:1/3:1 stackmatch switches from qro.cz, but can also be used with products from other manufacturers, which can be controlled with a 4-wire cable.

The operation is done by a rotary switch on the front panel, the selected configuration is indicated by LEDs. 

With the Easy Stack Match Controller 3:1 (3 outputs) the following combinations can be selected:

• TOP (upper antenna)
• MID (middle antenna)
• BOT (lower antenna)
• ALL (all antennas)
• T+M (upper and middle antenna)
• M+B (middle and upper antenna)
• T+B (upper and lower antenna)

The Easy Stack Match Controller 2:1 (2 outputs) allows you to select these combinations:

• TOP (upper antenna)
• BOT (lower antenna)
• BiP (both antennas in phase)
• BoP (both antennas out of phase)

We offer both devices as a manual version as well as with an additional option for remote operation via Web/IP. A comfortable web interface, which is based on the front panel of the controller, facilitates the operation and provides even more comfort. Furthermore, user-defined designations can be assigned to the connected antennas. The variants with remote control option also offer the control (on/off) of up to 8 additional external devices without the need to purchase additional control units or switches. The selection of these devices is also done in the web interface. 

As soon as your Easy Stack Match Controller is in remote mode, the controls on the front panel are locked to prevent unintended inputs. A corresponding LED additionally signals the "Remote" operating state.

For connection to the antenna switch, either the 15-pin SUB-D socket or the RJ-45 connector can be used.

The supply voltage is 13.8 V DC, a suitable power cable is included in delivery.