As the successor to the very successful TM-D700 the new TM-D710G offers true dual band operation with separate receivers for 2m and 70cm. The receiver works from 118 to 524 and from 800 to 1300MHz. The max. transmit power is 50 W on each band, reducable to 10 or 5W.
As a special feature the TM-D710E supports the connection of a GPS receiver and with that the operation as an APRS node. This support includes the new "NEWn-n" system for disseminating the position reports in the APRS system. Instead of the GPS receiver a weatherstation (Peet, Davis) could be connected, allowing the use of the transceiver as a weather node in the APRS system.
Like the TM-V71E the new TM-D710E supports Echolink operation. With an optional cable (PG-5H) and suitable software on a computer the transceiver can be immediately used as an Echolink node. Ten memories serve as special DTMF stores for often recalled Echolink connections.
Of course the display can be installed remotely (requires optional cable set PG-5F). The colour of the display can be selected by the user as amber or green. A DTMF microphone with backlit keys is included.
- APRS® function
- Memory 100 transmitters
- memory 100 messages
- automatic reply
- Digipeat function
- GPS connection port
- Weather stations
- sort/filter
- special warnings
- QSY function
- notification
- Monitor messages
- DXCluster
- Menu system
- Wide reception band: 118-524 MHz, 800-1300 MHz
- MC-59 handheld microphone with 16 buttons and backlighting
- Separate VOL/SQL controls for bands A and B
- 6-pin mini DIN input for external TNC
- 8-pole mini DIN input for connection to a PC
- Programmable function keys
- Band mask
- Call channel
- Squelch with signal indicator and timer with hysteresis
- Monitoring function
- Silencer (mute)
- Automatic switch-off after three hours
- MHz mode
- Selectable frequency step
- Change function
- Repeater spacing (selectable)
- Invert
- Auto repeater split (on/off, FM only)
- Automatic simplex check
- DTMF memory (10 channels, 16 digits)
- DTMF remote control
- Standby timer
- Keypad lock
- Activate password
- Change memory
- Programmable VFO
- Activation/deactivation of "beep", volume control
- microphone program function
- Channel display mode
- Power-on message
- LCD screen brightness control, automatic brightness adjustment
- Switching to an external loudspeaker
- Reset (VFO, Partial, PM, Full)
- Memory 100 transmitters
- memory 100 messages
- automatic reply
- Digipeat function
- GPS connection port
- Weather stations
- sort/filter
- special warnings
- QSY function
- notification
- Monitor messages
- DXCluster
- Menu system
- Wide reception band: 118-524 MHz, 800-1300 MHz
- MC-59 handheld microphone with 16 buttons and backlighting
- Separate VOL/SQL controls for bands A and B
- 6-pin mini DIN input for external TNC
- 8-pole mini DIN input for connection to a PC
- Programmable function keys
- Band mask
- Call channel
- Squelch with signal indicator and timer with hysteresis
- Monitoring function
- Silencer (mute)
- Automatic switch-off after three hours
- MHz mode
- Selectable frequency step
- Change function
- Repeater spacing (selectable)
- Invert
- Auto repeater split (on/off, FM only)
- Automatic simplex check
- DTMF memory (10 channels, 16 digits)
- DTMF remote control
- Standby timer
- Keypad lock
- Activate password
- Change memory
- Programmable VFO
- Activation/deactivation of "beep", volume control
- microphone program function
- Channel display mode
- Power-on message
- LCD screen brightness control, automatic brightness adjustment
- Switching to an external loudspeaker
- Reset (VFO, Partial, PM, Full)
| Product Name | TM-D710G |
|---|---|
| Brand | Kenwood |
| Weight | 1.5 kg |
| Antenna Connector | PL socket |
| Bluetooth Interface | No |
