LDG Z-100PLUS Antenna Tuner 125 W
€229.00
incl. VAT, plus shipping
€192.44
In stock, shipped in 1 to 2 days
SKU
Z-100PLUS
Supply Scope
- LDG automatic antenna tuner
- Power cord
The Z-100PLUS is an automatic antenna tuner useable for 1.8 to 54 MHz, for any transceiver with 0.1 to 125 Watt power SSB/CW (100W FM, 30W on 6m). The tuner is suitable for any unsymmetrically fed antenna (i.e. Beams, Dipoles, Groundplanes etc.). If the matching range is not sufficient, a 4:1 balun (symmetrical) or a MTFT balun (unsymmetrical) can be used (not included).
The tuner has 2000 memories which store settings for a once tuned frequency, when calling up the same frequency again the tuning lasts only some milliseconds. If no matching frequency is found tuning typically takes about 6 seconds.
Due to the use of latching relays the tuner requires only very little power (8 uA when stby)and is well suited for QRP/battery supplied operations. Power requirement during tuning is about 300mA. The Z-100Plus has two LEDs to show the current state (tuned etc.). Impedance matching range is 6 to 800 Ω, SWR from 10:1 (6m: 3:1), supply voltage required is 7 to 18V. Dimensions 140 x 140 x 38mm, weight ca. 400 gr. A DC cable is included.
Product Name | Z-100PLUS |
---|---|
Impedance Range (Ω) | 6 - 800 |
Min. Tune Power (W) | 0.1 |
Supported Bands | 160m, 80m, 40m, 30m, 20m, 17m, 15m, 12m, 10m, 6m |
Current Intake (A) | max. 0.2 A |
Supply Voltage [V] | 7 - 18 V |
Display | LED |
Number of Memories | 2000 |
Tuner type | Automatic Tuning |
Brand | LDG |
Weight | 560 g |
Max. Power [W] | 125 W |
Frequency Range | 1.8 - 54 MHz |
Size W x H x D | 139 x 139 x 38 mm |