LDG Z-817 Antenna Tuner 20W
€179.00
incl. VAT, plus shipping
€150.42
In stock, shipped in 1 to 2 days
SKU
Z-817
Supply Scope
- LDG Z-817 Tuner
- Control Cable for FT-817/818, length 1m
- Manual DE, EN
The Z-817 is the ultimate autotuner for QRP radios including the Yaesu FT-817/FT-818. The Z-817 interfaces to the CAT port (ACC) on the back of the FT-817 radio with the provided cable. Tuning could not be simpler; one button push on the tuner is all that is needed and the Z-817 takes care of the rest. It will switch to PKT mode, transmit a carrier, tune the tuner, then restore the radio to the previous mode! 2000 memories cover 160 through 6 meters.
Of course, the Z-817 will also function as a general purpose antenna tuner with other QRP radios. Just transmit a carrier and press the tune button on the tuner. The Z-817 is powered by four AA internal Alkaline batteries (not included), so there are no additional cables required to use the Z-817. Latching relays are used so that power consumption is Zero when not tuning allowing a set of batteries to last about one year.
Technical Data LDG Z-817
- RF Power 0.1 to 20 watts SSB, CW and digital modes
- Latching relays for ultra low power consumption
- Battery operated 4 x 1.5V Alkaline AA (not included)
- Built-in CAT port interface. CAT thru port for computer connection.
- 2000 memories when used with FT-817/FT-818 interface (200 memories for other radios)
- 1.8 to 54 MHz coverage
- Tunes 6 to 600 Ω (about 10:1 SWR range). 16 to 150Ω on 6m (about 3:1)
- SO-239 in and out connections for dipoles, verticals, beams, G5RV, OCF, Cobra, ect.
- Dimensions: 120 x 43 x 130 (WHD). Weight: approx. 300g (without batteries).
Included in shipment is one CAT cable for Yaesu FT-817/818.
Conn. A | Conn. B | Tuner | Radio | Function | |
---|---|---|---|---|---|
LDG-Y-ACC | 3.5 mm, Stereo | 3.5 mm, Stereo | Z-11Pro2, Z-100+, AT-100pro2, AT-200pro2, AT-600pro2, AT-1000pro2 |
FT-100, FT-857, FT-897, FT-891, FT-991/A | Tune |
LDG-Y-ACC2 | 10pin MiniDIN | 3.5 mm, Stereo | Z-11Pro2, Z-100+, AT-100pro2, AT-200pro2, AT-600pro2, AT-1000pro2 |
FT-450/D, FT-710, FT-950, FT-DX10, FT-DX1200 | Tune |
LDG-Y-ACC3 | 15pin SubD | 3.5 mm, Stereo | Z-11Pro2, Z-100+, AT-100pro2, AT-200pro2, AT-600pro2, AT-1000pro2 |
FT-DX101D/MP, FT-DX3000 | Tune |
LDG-Y-CAT | 8-pin MiniDIN | 8-pin MiniDIN | Z-817, AT-897+, YT-100 | FT-100, FT-857, FT-897 | Tune + Power |
LDG-I-ACC | Icom Tuner | 3.5mm + DC | Z11-Pro2, Z-100Plus, AT-100Pro2, AT-200Pro2, AT-600Pro2, AT-1000Pro2 |
all Icom w/ Tuner conn. | Tune + Power |
LDG-I7-ACC | Icom Tuner | 6-pin MiniDIN | IT-100 | all Icom w/ Tuner conn. | Tune + Power |
Product Name | Z-817 |
---|---|
Impedance Range (Ω) | 6 - 600 Ohm |
Min. Tune Power (W) | 0.1 W |
Supported Bands | 160m, 80m, 40m, 30m, 20m, 17m, 15m, 12m, 10m, 6m |
Supply Voltage [V] | 6 V |
Display | LED |
Remote Control capabilities | Yes |
Number of Memories | 2000 |
Tuner type | Automatic Tuning |
Brand | LDG |
Weight | 260 g |
Max. Power [W] | 20 W |
Frequency Range | 1.8 - 54 MHz |
Size W x H x D | 119 x 43 x 130 mm |